3 Ply Corrugated Carton Production Line

3 ply corrugated carton production line 

HB-I Hydraulic Mill Roll Stand

1.Machine Description: 

*This machine is used for supporting the paper roll, supply the paper to the production line.

2.Machine Function: 

*It can be loading two paper rolls at the same time, without stopping the machine for changing paper roll 

*The whole machine use 6 cylinders fully hydraulic controlled, hydraulic control arm lift and down, clamping and open,  left and right moving

 PH-60 Preheater

1.Machine Description: 

*This machine is used for heating liner (pre-heating for raw paper), and dry to control temperature and humidity

2.Machine Function: 

*Electric to adjust the wrap angle, preheating area can be in 360° range  

*Dishing seal structure on two sides,saving the steam and improving heating efficiency

SF-A15 Single Facer

1.Machine Description: 

*Single facer is design for producing single-face corrugated paper

OBH Conveying Bridge

1.Machine Function: 

*Main frame made by channel steel, and angle steel 

*With protecting handrail and safety pedal on both sides, the operation side is installed with safety ladder, to make sure the safety and convenience of the worker 

*Vacuum suction tension control,5 inch suction pipe with adjusting valve,draw fan power can be adjusted freely

GM-15 Gluer Machine

1.Machine Function: 

*After the glue roller surface quenched,tempered,ground and engraved pit,then doing balancing,making coating evenly, consume less glue 

*Glue roller controlled by frequency motor , the inverter control ensures glue line speed is synchronous with double facer, and can also operate independently

*Plc control the glue amount,automatically adjusted according to the production speed Automatic circulation for glue, avoiding glue precipitation

DF-60Double Facer

1.Machine Description: 

*Corrugated paper enter into the double facer hot parts with heating and molding after pasted glue, and  become board after cooling

2.Machine Function: 

*Hot Plates’ surfaces is ground and then chromed plated,width 600mm and 14pics,cooling parts 4m 

*Hot plates adopts the press shoes structure,it lifting adopt pneumatic structure 

*Heat conductive pipe of hot plates control the temperature segmented

SS-E Electric Slitter Scorer

1.Machine Function: 

*Frequency motor driving 

*5 blades 8 lines type, blade is made of tungsten alloy steel, cutting smoothly and service life is more than 30,000 m

NC-15 Cut Off Machine

1.Machine Function:

*The knife adopts spiral steel helical knife structure, serrated knife type, scissors shearing, keeping small shear force and long service life 

*The knife rollers adopt high quality precision forged steel material, having good stability after balanced

AS Gantry Stacking