Four servo double piece nail box machine

Technological parameter:

◆The original imported four servo drive from Mitsubishi, Japan, has accuracy and reduced mechanical transmission part, which can effectively reduce the failure rate of machinery.

◆The whole control system adopts OMRON PLC control system. All contactors in the control box are made of Mitsubishi brand.

◆The relay and circuit breaker are made of Schneider brand in France, and the photoelectric and proximity switches are made of OMRON brand in Japan.

◆Bottom mold and blade are made of Japanese tungsten steel (wear-resistant)

◆The whole set of nail heads are made of special steel and processed by computer numerical control.

◆It only takes one minute to change the size of the carton and adjust the nail distance of the carton, which greatly saves time and convenient operation.

◆Front and back two-way battle configuration, can order no cover cartons, small cardboard boxes, color boxes.

◆The rear section has the function of automatic counting. The finished products can be stacked to the end of the conveying machine according to the set quantity (1-99), which is convenient for packing and binding.

◆The front end paper feeding section counts automatically, and the paper feeding table is equipped with photoelectric induction device, which rises automatically during paper feeding.

◆Paper feeding height: 590mm.

◆A dual-purpose machine, which can be used to nail single piece of paper box, double piece of paper box and irregular paper box.

◆The size is controlled by full electric control, and it only takes 2-3 minutes to change the size.

◆It can be nailed with reinforcing nails, single rails, double rows of nails, once completed.

◆The paper feeding part counts automatically, and the finished products are sent out and bound.

◆Suitable for small and medium-sized cartons, last and labor-saving.

◆Adjust the nail distance, use the computer to set the automatic nail distance;

◆This machine uses computer screen to display fault description.

◆Automatic wire feeding system, no wtre alarm, 20kg large flat wire, saving time.

◆Applicable to three, five and seven layers of corrugated board (special instructions are required for seven layers).

◆The machine adopts four servo motors (i.e. two head motors and two control nail pitch motors).

◆Protection function of electrical isolation transformer of the whole machine;

◆Binding method: double straight nails or single straight nails/reinforcing nails.